Welcome to the Midwest Jeepthing

This website is home to the largest club of Jeep owners in the midwest. Feel free to browse the site and maybe even become a "FREE" online member so you can add your rig to our Member Rides section.


Sponsored By
Club Info Member Rides News Events Trail Guide Forums Sponsors My MWJT Logout HOME

Midwest Jeepthing Forums
Profile | Sign UP | Search | Guidelines & FAQs
Forums | SWB Technical Forum | throttle body Thread Closed Send Topic To a Friend
Author Topic
mattyoda
florissant, MO
Online Member
Posted - 18 July 2013 11:13  Show Profile  Email Poster  Edit or Delete Message  GoTo Member Rides
can I put a 4.0 throttle body on a 2.5 without much modification just trying to get a little bit more power out of my engine
Bounty Hunter

Honorary Lifetime,
Online Member
Posted - 18 July 2013 12:42  Show Profile  Email Poster  Edit or Delete Message  GoTo Member Rides
Yes. The 4.0L TB will need to be from a '91-'04 Jeep. If it's a '96+ TB you will need to cap the vacuum port at the bast of the TB where the MAP Sensor mounts on newer Jeeps.

Reuse the 2.5L sensors and the IAC housing (4 bolts on side of TB, usually tamper-proof torx).

mattyoda
florissant, MO
Online Member
Posted - 18 July 2013 16:11  Show Profile  Email Poster  Edit or Delete Message  GoTo Member Rides
what is there someone on the board who made the 62 millimeter throttle bodiesand the throttle body spacers
Bounty Hunter

Honorary Lifetime,
Online Member
Posted - 19 July 2013 11:30  Show Profile  Email Poster  Edit or Delete Message  GoTo Member Rides
That would be me. Email for more info.
Forums | SWB Technical Forum | throttle body Thread Closed Send Topic To a Friend

Click Here To Close Thread, Administrators & Moderators Only.

Show All Forums | Thread Closed