Welcome to the Midwest Jeepthing

This website is home to the largest club of Jeep owners in the midwest. Feel free to browse the site and maybe even become a "FREE" online member so you can add your rig to our Member Rides section.


Sponsored By
Club Info Member Rides News Events Trail Guide Forums Sponsors My MWJT Logout HOME

Midwest Jeepthing Forums
Profile | Sign UP | Search | Guidelines & FAQs
Forums | General Discussion Forum | seats Post Reply Send Topic To a Friend
Author Topic
shoal1
owensville, MO
Online Member
Posted - 27 October 2013 15:19  Show Profile  Email Poster  Edit or Delete Message  GoTo Member Rides
anybody no how to take seats out of 94 yj replacing with better ones need to get seat off of slide rail.I know that there are 4 bolts holding bracket to jeep.
Cant get to bolts on rail top and bottom rail should slide apart somehow??
Bounty Hunter

Honorary Lifetime,
Online Member
Posted - 27 October 2013 15:58  Show Profile  Email Poster  Edit or Delete Message  GoTo Member Rides
They're torx bolts, slide bracket one way and get 2, then slide to opposite end for other 2.
shoal1
owensville, MO
Online Member
Posted - 27 October 2013 16:4  Show Profile  Email Poster  Edit or Delete Message  GoTo Member Rides
seen bolts seat will not slide for enough to get to bolts
Bounty Hunter

Honorary Lifetime,
Online Member
Posted - 27 October 2013 17:35  Show Profile  Email Poster  Edit or Delete Message  GoTo Member Rides
It should. Both sides need to move at the same time or it'll bind. Make sure the slider isn't catching on seat material. You may have to slide the brackets back into the holes in order the slide the seat fully.
Forums | General Discussion Forum | seats Post Reply Send Topic To a Friend

Click Here To Close Thread, Administrators & Moderators Only.

Show All Forums | Post Reply